Ableton Live

This page shows how to play Bol Processor productions with Ableton Live, so that its instruments, effects and plugins play the music in real time and it can be recorded as clips. Two connections are possible:

  • real-time MIDI, which works with every edition of Live and needs no extra software. This is the simplest way, and it is enough for playing notes;
  • real-time OSC (Open Sound Control), received by a Max for Live device supplied with the Bol Processor. Max for Live is included in Live Suite, and is an add-on of Live Standard. This connection is meant for users who want to extend the device in Max, for example to control the parameters of Live devices from the values of Bol Processor instruments.

Both connections can run on the same computer as Live. They have been described for Live 12 on MacOS. Live does not run on Linux.

👉 More about the real-time MIDI output of the Bol Processor: follow this link.

Real-time MIDI

The Bol Processor sends MIDI messages to a virtual MIDI bus, and Live receives them on a MIDI track as if they came from a keyboard.

Create a virtual MIDI bus

On MacOS, the IAC Driver provides virtual buses:

  1. Open Audio MIDI Setup (in Applications/Utilities), then Window > Show MIDI Studio.
  2. Double-click IAC Driver and check Device is online.
  3. Use a bus that no other program listens to. If Bus 1 is already used, for instance by Pianoteq, add a bus with the + button: Bus 2. Otherwise both programs will play the same notes.

On Windows, a virtual MIDI cable such as loopMIDI plays the same role.

Settings in the Bol Processor

On the page of the grammar or data project, select the output format Real-time MIDI and choose the bus (e.g. IAC Driver Bus 2) as the MIDI output. Then save the MIDI ports.

Settings in Live

  1. Open Settings > Link, Tempo & MIDI. In the list of MIDI Ports, set Track to On for the input of this bus (e.g. In: IAC Driver (Bus 2)). Leave Remote off, otherwise Live may take some notes and controllers as commands.
  2. Create a MIDI track. In its MIDI From menu, select the bus, and set Monitor to In.
  3. Load an instrument on the track: Grand Piano, Wavetable, Sampler, a plugin…
  4. Click PRODUCE ITEM(S) or PLAY in the Bol Processor: the track plays the notes.

Several instruments

The Bol Processor assigns MIDI channels to notes with _chan(). In Live, create one MIDI track for each instrument, all receiving from the same bus, and set the channel menu below MIDI From to a different channel on each track (Ch. 1, Ch. 2…). Each part of the music is then played by its own instrument. For example, _chan(1) C4 D4 E4 goes to the first track and _chan(2) C3 G3 to the second.

Recording clips

Arm the tracks (record button of each track) and start recording in Live, either in the Session view (a clip slot) or the Arrangement view, then play the item in the Bol Processor. The production becomes a MIDI clip that can be edited, quantised or played again by Live without the Bol Processor.

Live records at its own tempo. The dates of the notes are kept, but they fall on Live's bars only if both programs use the same tempo. To export a production without playing it, the output format MIDI file gives a file that can be dropped into Live.

Microtonal scales

In real-time MIDI, the Bol Processor plays microtonal scales with pitchbend messages, using a separate MIDI channel for each note (see this page). This needs an instrument accepting pitchbend on several channels, which Live's tracks do not provide in their usual setting.

Live 12 has its own solution: tuning systems, which it reads from SCALA files (.scl). On the page of a tonality resource (-to file), the Export to SCALA button saves each scale as a SCALA file. Drop this file into Live's window to make it the tuning system of the Live set, and the instruments play the notes in this scale. Bol Processor notes then only need to give the keys, as they do without a scale.

Interaction

The Bol Processor can also wait for MIDI events, for instance _script(wait for C3 channel 1) (see interactions). Live can send them: on a MIDI track, choose another bus (e.g. Bus 3) in MIDI To, and select this bus as the MIDI input of the Bol Processor project. Don't use the bus that brings notes from the Bol Processor, as the notes would loop between the two programs.

Real-time OSC with Max for Live

With the output format Real-time OSC, the Bol Processor sends each note as an OSC message over the network (UDP), at the time it should be played. A message /bp/note gives the number of the note, its instrument number and name, its MIDI key, its frequency in Hertz, its duration, velocity and channel, followed by named values of the instrument such as vol, pan or mod. A message /bp/off ends the note. The full description is in the file ReadMe.txt of the folder osc_resources.

Live does not receive OSC by itself. The device BP_OSC_to_Live.amxd, in the same folder, is a Max for Live MIDI effect that receives these messages and plays them as MIDI notes on the instrument of its track.

Installing the device

  1. Find the folder osc_resources of the Bol Processor installation (inside the bolprocessor folder). The device can also be downloaded from a project page: select the output format Real-time OSC and click the Ableton Live link below it.
  2. Create a MIDI track in Live and load an instrument on it.
  3. Drag BP_OSC_to_Live.amxd from the Finder to this track, before the instrument. It can also be added to Places in Live's browser for later use.
  4. In the Bol Processor, select the output format Real-time OSC. Below it, keep the host 127.0.0.1 (this computer) and the port 7400, or type the address of the computer running Live and click SAVE.
  5. Play the item: the track plays the notes.

Controls of the device

  • Receive OSC: the device listens to the UDP port. With several devices in a Live set, keep it on in one device only. That device shares the messages with all the others, which would otherwise receive them twice.
  • Port: the UDP port, 7400 by default. It must be the port set in the Bol Processor.
  • Channel: the device plays only the notes of this MIDI channel (_chan()). 0 plays all channels.
  • Instrument: the device plays only the notes of this instrument (_ins()). 0 plays all instruments.

For several instruments, put a device on each track and set its Channel or Instrument. Selecting by instrument means a grammar written for Csound or SuperCollider, using _ins(), can be played by Live without changing its MIDI channels.

What the device plays

  • Each note is played with its MIDI key and velocity, and ends with the message /bp/off.
  • The frequency is not used: for microtonal scales, load their SCALA export in Live's tuning systems, as with MIDI.
  • At the beginning of each note, the values vol, pan and mod of the instrument are sent to the instrument of the track as controllers 7 (volume), 10 (panoramic) and 1 (modulation wheel, mod divided by 128). Whether they change the sound depends on the instrument.
  • Notes of duration 0 (out-time notes such as <<C4>>) are played as a note-on followed at once by a note-off.
  • Clicking STOP, PAUSE or PANIC in the Bol Processor sends /bp/stop, which turns off all keys.
  • MIDI from the track's input (e.g. a keyboard) passes through the device unchanged.

Going further

The point of OSC over MIDI is that every value of a Bol Processor instrument reaches Live by name. Click the Edit button of the device to open it in Max. The objects [zl iter 2] and [route vol pan mod] give the named values of each note. Additional parameters, for example _value(splash,250), can be added to the route and sent to [live.remote~] to control any parameter of a Live device, such as the cutoff of a filter. The exact frequency of each note can also be used by a synthesiser built in Max.

If nothing is heard

  • With MIDI, check that the track's MIDI From is the right bus and its Monitor is In. The MIDI activity indicator at the top right of Live's window flashes when notes arrive.
  • With MIDI, check that the channel of the track matches the _chan() of the notes, or set it to All Channels.
  • With OSC, check that Receive OSC is on in one device and that its port is the one set in the Bol Processor. The Max Console (Window > Max Console in the Max editor of the device) shows an error if the port is used by another program.
  • With OSC, a firewall may block UDP messages when Live runs on another computer. On the same computer, use the host 127.0.0.1.
  • Notes played twice: two devices have Receive OSC on, or two programs listen to the same MIDI bus.

Note: This page was entirely composed by Claude Opus 5.5 on 21 November 2026.

Leave a Reply

Your email address will not be published. Required fields are marked *

« Translate